BIKE BUILDS 2

Is there anyone out there that can take my bike and turn it into a three wheeler? I would be willing to pay possibly three thousand dollars or more to have it done. I have no idea how much it would cost. Please send me an e-mail if you have the ability or know of someone who can. My bike is a drive shaft bike which I would think would be helpful in this project.

brotherrock@bluemarble.net

ROBERT KNIGHT on Friday, 04 May 2012 18:06

Hey Bro Rockie, take a look at www.towpacusa.com
They have a trike kit that is not to expensive.
Praying for you brother.

Rockie Grimes on Friday, 04 May 2012 21:23

I have looked at InstaTrike before. I am considering them. I would like to have a brother in ASR who can build one do it but if none can I will buy an InstaTrike. Thanks for your prayers.

15 days ago

Rockie Grimes,

Well all I do not know how much longer I will have in my life to be riding a two wheeler. I have one more test to verify it, but my doctor at the Cleveland Clinic is pretty sure that I have Primary Lateral Sclerosis. I am scheduled to get a spinal tap done to eliminate any other possibility but the doctor is sure they will not find anything. So I thank my Father for all that He has given me including allowing this disease and ask Him to be glorified by how I handle it.

Doug Joseph on Tuesday, 01 May 2012 03:01

Bro Rockie, I will be in prayer and fasting for you. Thanks for letting us know.

Phil Kemp on Tuesday, 01 May 2012 04:32

Bro. Rockie. We serve the only true and living God, who made man from the dust of the earth. HE is in the healing business. We will be in prayer for you. Phil

Rick Perry on Thursday, 10 May 2012 02:24

Our God is still THE Healer. In Jesus name.

Rockie Grimes on Sunday, 13 May 2012 01:37

Well all, Our father will get glorified one way or another. Either by miraculously healing me or by my peacefulness he has given me.

18 days ago

Jim Martin,

having a blast with this build. When I was a kid in the 70's the local clubhouse was two houses down and I kinda became the "Kid Brother" to all the Bikers that hung out there. I would set for hours and soak up everything I could about the bikes. All I wanted was a bike like theirs and a Cut. I wanted this build to be a trip down memory lane. Very little on ths bike came from the HD Shop. The Tins are all hand fabbed. The rear fender is a trailer fender narrowed and cut. the seatpan is from a tractor seat. the sissy bar was bar stock. Struts are cold roll. Frame is chopped and raked. Motor is a F1 lightning 74CI. Forks are chopped 2". Its almost done and I think the Old Guys would be proud if they could see it. I wish I could take it back to the old block and show it to Taco, Fatcat, Larry Lane, Mad Dog, Billy Lawless, Renfro, Ronny Jack, Tommy, and the rest of the guys, but they are all gone now. So Ill just show it to you guys and say this is how it was done back in the gap - NE Texas Style.

Anthony Todd Storey on Monday, 30 April 2012 15:10

bro. martin thats a sharp bike,will you be going to WV for the really this year? if so will you be riding this bike? well thanks for the post

38 days ago

Rockie Grimes,

Well good news and bad news. I got the exhaust gaskets in and my friend tried bleeding the clutch but cannot get it to work. Then we lost all electric for some reason. Now we have to wait till next week to figure it out. Praise the Lord!

Jim Martin on Wednesday, 11 April 2012 03:35

You need some Gremlin repellant....?

Anthony Todd Storey on Monday, 30 April 2012 15:12

hey bro. grimes sounds like its coming together all those little things will work out,you will see :)

44 days ago

Rockie Grimes,

I need the clutch and brakes refilled and bled, waiting for exhaust gaskets I had to order to get in and a put on few odds and ends. It will be the end of next week before the gaskets get in but we may try to fire it up before then after putting the fluid in. Here is the latest picture.

47 days ago

Rockie Grimes,

I have a co-worker finishing putting my bike back together for me. I had it about 85% done and now it is about 95% done. I pray I can get it back together and running before my right leg is too weak to keep the bike up.

56 days ago

Jim Martin,

Work in progress.

Rockie Grimes on Saturday, 10 March 2012 21:51

Very interesting looking bike you got going there Brother Jim Martin. Know where Buda Texas is located? Once my home.

70 days ago

Michael Theodore,

At this time I do not have plans to build up a bike. But will some day even though I built up so many cars for show and drag racing.
Right now all just enjoy everyone else's build :))

171 days ago

Anthony Todd Storey,

to all feel free to post pics of your fav. bikes,or any you are working on hope to see what you guys are putting together.

198 days ago

Rockie Grimes,

I have arrived. Still "building" my ride. :-(

Anthony Todd Storey on Wednesday, 02 November 2011 12:05

looking forward to seeing pics of it.

Rockie Grimes on Saturday, 10 March 2012 21:46

I finally put at least a couple of pictures up. What it was and what it is now.

199 days ago

User Login

Who's Online

BIKE BUILDS 2

Group Options

Admins

Members

Photo Albums

Videos

Events

Description

Announcements

Wall